Description
The IHC-200 is a humidity controller designed to regulate and control humidity levels in specific environments, such as greenhouses, grow chambers, drying rooms, or any other location where precise humidity control is required. This device is widely used in agriculture, horticulture and other related industries.
Display and Settings:
Digital display that displays information such as current humidity, target value, and setting settings. It can have buttons or knobs for easy programming and parameter adjustment.
Humidity Range:
The IHC-200 humidity controller usually allows you to set a desired humidity range. When humidity drops below or exceeds this range, the controller will activate or deactivate a connected humidification or dehumidification device, such as a humidifier or dehumidifier.
Humidity Sensor:
It comes with a humidity sensor that constantly measures the humidity levels in the environment. The controller uses the sensor information to make decisions and keep the humidity within the set range.
Control Functions:
The IHC-200 generally offers control options to suit different needs. You can allow humidity control at a single point or use a differential control mode that activates the humidification or dehumidification device when the difference between the actual humidity and the target humidity reaches a predefined threshold.
Remote Control:
Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, then you can monitor or adjust your phone’s humidity via the INKBIRD app anytime, anywhere.
Dual relay output:
Supports both humidification equipment and dehumidification equipment. Voltage: 100-230Vac 50/60Hz, 10A. Maximum power: 1200W (120Vac), 2200W (220Vac). Humidity measurement range: 10~99% RH. Relative humidity accuracy: ± 3%RH~±5%RH
Plug-n-Play:
No complicated installation required. It displays the set humidity value and the measured humidity value at the same time with 2 displays. Supports humidity calibration and protection against dehumidification control delays.
High/Low Humidity Alarm:
Set a high/low humidity alarm, the controller will alarm you to remind you if the humidity value exceeds the set value, and also alarm when a probe error occurs. Press any button to turn off the alarm sound, or you can turn it off on your phone.
