Description
OWON HDS242S 3 in 1 portable digital oscilloscope waveform generator multimeter 2CH USB type C 40MHz 3.5 LCD test meter.
3-in-1 Multifunction: In oscilloscope mode, it features dual-channel input with 40 MHz bandwidth and waveform refresh rate up to 10,000 wfms/s; In multimeter mode, it can measure voltage, current, resistance, diode, capacitance and do continuity test; In waveform generator mode, it can output sinusoidal, square, ramp, pulse, and special built-in waveforms. frequently up to 2.5 MHz.
Ergonomic design: its compact size makes it easyErgonomic design: its compact size makes it easy to take outside, and it has a stand that allows you to sit safely at the table. Comes with carrying bag for convenient storage. Carrying bag for convenient storage.
Large Battery Capacity: Powered by two 2200mAh batteries, it can run continuously for about 6 hours on a single charge, and can be easily charged via its USB interface using an adapter or portable battery.
Large and Clear Display: Equipped with a 3.5-inch high-resolution, high-contrast color LCD display, making it easy to read numbers and waveform details.
Easy to Use: With simple button panel and intuitive interface, this device is easy to operate, suitable for outdoor facility maintenance, quick on-site measurement, car maintenance, energy detection. etc.
3 functions in 1
Oscilloscope + Multimeter + Waveform Generator (only for HDS242S/HDS272S)
A key switch.
3.5-inch
high-resolution display 3.5-inch high-resolution TFT color LCD screen (320×240), clear and delicate display for observing waveform details.
USB Type-C Dsign
interface The USB Type-C interface can be used by an adapter or a power bank, and supports PC software connection.
20,000-sample multimeter with true
RMS Supports measurement of voltage, current, resistance, diode, capacitance, and continuity test.
SPECS:
Channels: 2
Sample Rate: 250 MSa/s
Recording Length: 8K
Waveform Update Rate: 10,000 wfrms/s
Display: 3.5-inch LCD
Input Coupling: DC, AC and Ground
Input impedance: 1 megaomnio ± 2%, in parallel with 16 pF ± 10 pF
Probe Attenuation Factors: 1X, 10X, 100X, 1000X, 10000X
Maximum Input Voltage: 400V (DC+AC, PK-PK, 1Megaomnios Input Impedance, 10:1 Probe Attenuation)
Bandwidth limit (typical): 20 MHz
Horizontal scale: 5 ns/div – 1000 s/div, step through 1 – 2 – 5
Vertical sensitivity: 10 mV/div – 10 V/div
Vertical resolution: 8 bits
Type of trigger: Edge shooting modes: Auto, normal, single
Automatic measurement: Period, Frequency, Average, PK-PK, Max., Min.
Communication Interface: USB Type-C
Multimeter
Maximum Resolution: 20,000
Test Modes: Voltage, Current, Resistance, Capacitance, Diode, and Continuity Test
Input Impedance: 10 Megaomnios
Maximum Input Voltage:
AC: 750 V
DC: 1000 V
Maximum Input Current:
CC: 10 A
AC: 10 A
Diode: 0 – 2 V
Waveform Generator (only for HDS242S/HDS272S)
Frequency Output:
Sine: 0.1 Hz – 25 MHz
Square: 0.1 Hz – 5 MHz
Ramp: 0.1 Hz – 1 MHz
Pulse: 0.1 Hz – 5 MHz
Arbitrary: 0.1 Hz – 5 MHz
Channel Sample Rate: 125 MSa/s
1-channel amplitude range: 20 mVpp – 5 Vpp
Vertical resolution: 14-bit
Output Impedance: 50omns
Waveform Length: 8K
