Description
Specifications:
Material: Plastic
Soil pH measurement range: approximately 3.0 – 10.0 pH
Accuracy: approximately ± 0.25 pH ± 0.2 pH
Working temperature: approximately 0 – 50 ° C
Calibration: manual point 1
Probe length: approximately 18 cm / 7.09 ”
Notes:
1. The pH value of the soil is a very important factor for crop quality.
2. Most crops cannot survive in soils that are too acidic or too alkaline.
3. Getting the correct pH reading for your crop is very important.
Method of use:
1. Measure the pH of the soil, as far as possible to probe deep into the soil and probe the top for about 1 cm.
2. In the table there are 2.5-9 numerics, the basic numeric 7 is neutral, the lower the number shows that the higher the acidity, adjust the pH value of the soil according to the plant varieties.
4. Pay attention to insert the electrodes without touching the stone, not too hard, otherwise easy to damage the electrode, clean the electrode after use.
Design: Small size, portable with a bag, convenient for anywhere. Compact ergonomic design, looks great.
Note:
1. We provide clear images, whenever possible. Check as much as possible to make sure the item is the one you need.
2. The actual item may have slightly different color with the listing picture because of different computer screens, thanks for your understanding
Directions for use
First place the probe as deep into the ground as possible, connect it to about two-thirds of the position, until the pointer reading can be stable.
Clean the catheter with a soft, damp cloth and keep it secure.
Warm tips: When using it, pay attention to insert the electrode so that it does not touch the stone, do not exert too much force. You can’t stick the probe on the ground for a long time,
It cannot be used to analyze liquids.
