Description
- Characteristics:
-AC/DC 600A Clamp Probe Capable of measuring AC/DC up to 600 amps, the BT-605A clamp adapter is built for increased current measurement.
-Great companion for DMM: 1 mV per amp output and standard 3/4 inch banana connectors that makes it compatible with most multitesters that features 1 mV of sensitivity.
Accurate ampere measurement: +/- 3.0% + 10 accuracy for signal output conversion. Arrow on the jaw indicates the current DC direction of the positive current flow (positive to negative)
-Easy to use Maximum jaw gauge size up to 1.772 in., allows you to accurately measure AC or DC amperage up to 600 amps without breaking the circuit.-Tips: Putting an amperage clamp on a power cord wouldn’t get a reading, you’ll have to put an amp clamp around the live cable only, or use an “AC line splitter.”
-9V battery included.
-Specifications for BT-605A Amp Clamp:
DC current: 600 A.
AC current: 600 A.
Jaw Gauge: 1.77 inches.
Output conversion: 1 mV/1 A.
Conversion accuracy: +/- 3.0% + 5 digits.
Output impedance: 10 K.
Dimensions: 7.9 x 3.5 x 1.6 in.
Tips for BT-605A:It works perfectly with BTMETER multimeters, such as: BT-770M, BT-770N, BT-770K, BT-90EPD, BT-90EPC, BT-6688G, BT-6688H, etc.
When performing DC current measurement, always press the “REL” key on the multimeter for zero.
When performing AC current measurement, always use the clamp to round the live wire only, or use “AC Line Splitter”
Connect the black banana connector of the BT-605A AC/DC power adapter and the redbanana connector to the “mA” port.
Press the “SELECT” button on the multimeter and press the AC/DC button on the clamp adapter to choose the “DC” or “AC” measurement.
The arrow on the right side of the jaw indicates the DC current direction of the positive current flow (from positive to negative).
The package includes:
1 BT-605A amplifier adapter. 1 9 V battery.
