Description
FNIRSI 2C23T 3 in 1 Portable Multimeter Oscilloscope DDS Generator, 2 channels, 10 MHz bandwidth, 50 MSa/s sampling rate, 10000 counts, voltage, current, capacitor,
The FNIRSI 2C23T is a portable handheld digital oscilloscope used to measure and visualize electrical signals in the time and frequency domain. Here are some details about this device:
Main function: It is used to display waveforms of electrical signals, such as voltage and current signals, as a function of time. It can also perform measurements of electrical parameters such as frequency, amplitude, period, pulse width, among others.
Technical features: This digital oscilloscope has a color LCD screen where the waveform of the measured signal is displayed. You can have two input channels to measure two signals simultaneously. In addition, it can offer different ranges of sample rate, vertical resolution, and bandwidth, depending on the specific model.
Typical Applications: Used in a wide range of applications, including consumer electronics, education, electronic circuit design and testing, electronic equipment repair, and in general electronics projects.
Additional Features: In addition to waveform display, the FNIRSI 2C23T can have additional features such as automatic measurement of electrical parameters, waveform storage, mathematical signal analysis, and ability to communicate with computers via USB or Bluetooth interfaces to transfer data.
Portability: One of the standout features of this oscilloscope is its compact and portable design, making it ideal for use in the field or in work environments where space is limited.
Operation and Use: The FNIRSI 2C23T comes with a set of test probes that connect to the oscilloscope’s input channels to measure electrical signals. Users can adjust the timescale and vertical scale to get a detailed view of the measured waveform.
Oscilloscope mode: 2-channel handheld oscilloscope, 10 MHz bandwidth, 50 MSa/s real-time sampling rate, 32 kb recording depth, maximum measurement voltage ± 400 V, automatic measurement function, auto/normal/single trigger function, 200 mv/div-10v/div vertical sensitivity, support for waveform image storage and export.
Multimeter mode: 4 digits 10000 counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99M omnios, Capacity: 0-99.99mF, Temperature: -67.0°F-2,372.0°F/-67~2372°F, Diode, Continuity Measurement. An ideal multifunction meter for professionals, factories, schools, hobbyists or home use.
Signal generator: The maximum waveform output frequency can reach 2 MHz and 1 Hz step, and can output seven waveforms including sine, square, triangle, full, medium, noise, and DC.
Excellent design: The oscilloscope adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 320 x 240 resolution 2.8-inch HD LCD display, 3000mAh lithium-ion rechargeable battery, standby time up to 6 hours, Type-C interface supports 5V/1A power adapter charging.
Save function: one-click, detection function. You can upload the saved image by connecting to the PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen.
