Description
FNIRSI USB Tester 4-24V 6.5A LCD USB A and C Voltage current power multimeter with Bluetooth, fast charge detection trigger, PD2.0/PD3.0, QC2.0/QC3.0, CNC metal housing
About this article
Updated Design USB Tester: The FNIRSI FNB48P USB Tester has a 1.77-inch full-color ultra-wide viewing angle TFT LCD screen, built-in USB-A, Micro-USB, Type-C interface. It is a high-reliability, high-security USB voltage and current sensing meter and a mobile communication terminal fast charging trigger. Gravity sensor, automatically changes the direction of the screen.
Multi-function USB Digital Tester: FNB48P uses 16-bit external physical chip ADC, PD protocol. It can be used to measure the power supply or power consumption of products such as USB interfaces, mobile phone chargers, and U-disks. FNB48P USB tester can monitor the voltage, current, power, resistance, capacity, temperature, D+/D voltage, etc., it can be used to test the fast charging protocol of chargers.
Fast Charging Protocol Trigger Detection: FNB48P supports trigger detection of various fast charging protocols, QC2.0/QC3.0 trigger, FCP/SCP trigger, AFC trigger, PD2.0/3.0 trigger, VOOC/WARP trigger, Super VOOC 1.0/2.0 trigger. All of the above protocols support automatic monitoring. MTK-PE automatic detection. Supports QC2 protocol conversion. O-> PD2.0.
Parameter detection and recording: the highest display of six digits of voltage, current and power, the highest resolution is 0.00001 (V/A/W). 10 sets of switchable capacity, power, and time stats. 1 set of voltage and current curve logs, support maximum 9 hours. Support low-speed waveform (voltage, current, D+/D-) drawing, sampling rate 2sps-100sps> . Support high-speed ripple (voltage, AC coupling) drawing, up to 3.2M sps sampling rate.
Other Sensing Functions: FNB48P also has many functions that other USB testers do not have. The measurement of the internal resistance of the cable by the differential pressure method. E-Marker cable chip reading. Reading data from the DASH cable. Recording of the start time. Temperature measurement on board. PD monitor. Analog DASH cable.
FNB48P USB tester has a 1.77-inch full-color ultra-wide viewing angle TFT LCD screen, USB-A, Micro-USB, Type-C interface. FNB48P uses 16-bit external physical chip, PD, can be used to test the fast charging protocol of chargers.
FNB48P can be used to measure the power supply or power consumption of products such as USB interfaces, cell phone chargers and U-disks.
It measures the charging power of mobile phones and the input and output of mobile power supplies. FNB48P USB tester can control voltage, current, power, resistance, capacity, temperature, D+/D voltage, etc.
FNIRSI FNB48P USB Tester 4-24V 6.5A LCD USB A and C Voltage Current Display USB Fast Charging Detection Multimeter.
